This Includes:
Operate and test unit / note any problems Question the operator for any problems.
Change engine oil and filter Check air filters or Replace Blow off Engine, Radiator, misc Lubricate/inspect lift chains for excess wear/stretching Lubricate all grease fittings/pivot points or wear points Visual Inspection all wheel lug nuts Check wheel bearings for play or abnormal noise
Check for cracks (frame/cyl/etc) or loose bolts
Check for loose fittings
Check all cylinders for leaks or pitting
Check fork pin catches and inspect top carriage bar teeth
Check fork heel thickness with wear gauge (Extra)
Adjust lift chains to allow forks 1⁄2” clearance from floor Inspect mast rollers and rails
Inspect lift chain wear and chain sheaves Look for missing anchor cotter pins
Check pedal linkage for excess looseness Does engine start and run okay?
Inspect fan blade, water pump, belts and pulleys (Extra)
Pull and inspect one spark plug, remove dist cap & inspect (Extra)
Check and clean battery terminals Check all other fluid levels (Extra) fuel filter or drain excess oil from lp filter lockoff valve
Check all gauges and instrument lights for proper operation
Check seat mounting and slide operation
Touch up paint (optional – approve w/customer)
Check antifreeze coolant protection level Check charging system/starter
We specialize in all your parts needs, especially hard to find parts.